Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) Arbeitspaket 3 Lightweight Cylinder of Alternative Design Lingk & Sturzebecher Leichtbau GmbH
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zIntroduction yRelationship between Cylinder Manufacturing Cost and Weight and the Market Potential yProposed Alternative Lightweight Cylinder Design yDelivery Pipes from Composite
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zHydraulic Cylinders - Manufacturing Cost versus Weight
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zThe Market Potential
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zProposed Alternative Design yCutdown Steel Barrel, Wrapped with CFRP, Suitable for M38B
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zComparison Between Designs yStandard Steel Design xMass:300 kg xRelative Cost:1 yProposed Alternative (for M38B, Cut-down Barrel & CFRP-Wrapped) xMass:251 kg xRelative Cost:? yCurrent Lightweight Design (for M38B, CFRP/Liner/Tie-Rod design) xMass:184 kg xRelative Cost:2...5
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zCylinder Stress Analysis yCoarse Meshed Model Meshed Model Von Mises Stress [MPa]
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zCylinder Stress Analysis yFine Meshed (Sub-) Model Region to be Sub-Modelled Mesh of Sub-Modelled Region Von Mises Stress in Sub-Modelled Region [MPa]
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zCylinder Stress Analysis yAnalytical and Numerical Analytical Numerical (FEM)
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zCylinder Manufacturing Options yThin-walled tube and welded thicker end region yThick-walled tube and turned down to required thickness
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zDelivery Pipes from Composite
Projekt ULMA - Lingk & Sturzebecher Leichtbau GmbH 3. Arbeitssitzung ( ) zConcrete Pipe Manufacturing Options ySingle Steel Barrel yWear-resistant inner tube (Steel/Plastic) and Pressure resistant outer tube yGlass-Fibre reinforcement yCarbon-Fibre reinforcement